DreamLine SHDR-20307210F-HFR-01 Installation Guide download pdf (Page 26)

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 26

32. Hold the door in place and mark the drill

holes for both Hinges (05) on the wall. Set

the door aside and drill the holes in the wall

using Ø 1/4” drill bit.

Place the Glass door (01) back on the flat

timber and attach both hinges to the wall

with only two Countersunk screws ST5×70

(04) on the hinge from outside of the

shower.

See Fig. 32 for details.

ATTENTION:

This door is extremely heavy and the

hinges on this door must be attached to

the studs or to preinstalled 2 × 6 wood

reinforcement behind the wall.

Fig. 32

ATTENTION

Back plate of the hinge from inside the

shower locates too close to the drilled

holes in the wall and might get

scratched with the long screws or

screwdriver.

(OPTIONAL)

33. Carefully remove back plates from the

Hinges (05) and set the Glass door (01)

aside.

Screw in rest of the Countersunk screws

ST5 x 70 (04) into the wall, place the

Glass door back to its position and

reassemble the Hinges.

See Fig. 33 and Fig. 34 for details.

Fig. 33

outside

outside

inside

inside

inside

1

2

3

4

Ø5/16"

1

2

3

4

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments