“Elegance” Rev.4 Ver.1 07/2013
9
NOTICE:
The Glass door has 2 cuts for the Pivot assemblies. The
deeper cut must be on the top.
6. Remove the Bolts (L) and Back plates (K) from the upper and
bottom Pivot assemblies (07).
Place the Glass door (03) to the Pivot assemblies, attach
Back plates (K) to its position and fasten tight the Bolts.
Make sure the clear rubber Spacers (J) are in between the
glass and the metal parts. Secure tide the Glass door to the
Pivot assemblies.
See Fig 6 for details.
Fig. 6
7. Mount the Handle (06) onto the Glass door (03).
See Fig. 7 for details.
Fig. 7
2
1
Comments to this Manuals