DreamLine SHDR-4158720-04 Installation Guide download pdf (Page 12)

“ELEGANCE” Rev.2 Ver.2 05/2013

14. Adjust the width of the Glass door (03) by pulling out the Glass profiles

(2) and (4) if it necessary for size of your door.

Adjust the Glass door using a level and tighten in place with the Round

head socket bolt M6×12 (17). Close the glass door and make sure that

there is 1/16" - 1/8" gap between the glass door and the anti-water strip.

See Fig. 14 for details.

Fig. 14

15. After final adjustments of the Assembled unit drill the

holes in the Glass profiles through predrilled holes in the

Wall profiles using Ø 1/8” drill bit.

NOTE: You only need to drill through the first layer of the

Glass Profile.

Use Flat head screws ST4.2×16 (14) to secure the Glass

profiles inside of the Wall profiles. Cover the exposed

screw holes with Decorative cover (09).

See Fig. 15 for details.

Fig. 15

Ø1/8"

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

No comments

DreamLine SHDR-4158720-04 Installation Guide Page 12