DreamLine DL-6186-01 Installation Guide download pdf (Page 16)

Ver. 1, Rev. 1

Fig. 23

Product maintenance

To insure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth.

To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive

cleansers, metal brushes or scrapers that could scratch or dull the surface.

Acrylic cleaning procedure:

Acrylic should be cleaned with warm water and a clean, nonabrasive cloth. If desired, a mild,

nonabrasive detergent may also be used. Use only light pressure when cleaning. Avoid

rubbing dirt or grit into the surface. Turn the cloth often and replace with a clean cloth

frequently. Dry by blotting gently with a clean, dry cloth.

DO NOT USE:

Window cleaning sprays, alcohol, kitchen abrasive compounds, or solvents (such as acetone,

gasoline, or thinners). Do not use ammonia based cleaning solutions on the acrylic as it will

eat into the surface and cause it to damage.

How do you get scratches out of Acrylic?

For light scratches, use a buffing compound such as a car wax. Use a buffer or slightly buff

the surface by hand until scratches disappear.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

No comments

DreamLine DL-6186-01 Installation Guide Page 16