DreamLine DL-6186-01 Installation Guide download pdf (Page 18)

“SLIMLINE SHOWER BASE” Rev.3 Ver.4 05/2013

Preparation

1. Examine boxes and packages for shipping damage. Carefully remove Shower base from the

packaging and check for any visual defects or shipping damages. If the unit has been damaged,

has a finishing defect, or has missing parts, please contact our customer support department

within 5 business days of the delivery date. Please note that DreamLine

will not replace any

damaged products or missing parts free of charge after 5 business days or if the product

has been installed. Feel free to contact DreamLine

if you have any questions.

2. Install all of the required plumbing and drainage before installing the shower. Use a

competent and licensed (if required by local code) plumber for all plumbing installation.

3. Please note that you should consult your local building codes with questions on

installation compliance standards. Building and plumbing codes may vary by location,

and DreamLine is not responsible for code compliance standards for your project.

4. Please insure that prior to the installation the installation surface is leveled and solid and will be

able to support the total weight of the unit. Also make sure the walls are at right angles. While

some adjustment in leveling of the tray is possible, irregular installation surface level or

improper angle of side walls will result in serious problems for your installation. Please, note

that some adjustments and drilling might be necessary during the installation process.

IMPORTANT NOTE: Dimensions provided for reference only. You must measure

the actual shower tray sizes before installation. Allowed tolerance for center of

the drain is ±1/2".

Tools Required

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

DreamLine DL-6186-01 Installation Guide Page 18