DreamLine DL-6186-01 Installation Guide download pdf (Page 3)

Ver. 1, Rev. 1

Preparation

1. After opening all boxes and packages, read this introduction carefully. Check that all of

the needed parts are included in the package, by marking all the components on the

“Detailed Diagram of Shower Door Components”. Examine boxes and packages for

shipping damage. If the unit has been damaged, has a finishing defect, or has missing

parts, please contact our customer support department within 5 business days of the

delivery date. Please note that DreamLine

will not replace any damaged products or

missing parts free of charge after 5 business days or if the product has been

installed. Feel free to contact DreamLine

if you have any questions.

2. Please note that you should consult your local building codes with questions on

installation compliance standards. Building and plumbing codes may vary by

location, and DreamLine is not responsible for code compliance standards for your

project.

3. This acrylic wall system is specially designed to be installed over any solid surface. If you

are installing the acrylic walls over the existing tiles, remove all loose tiles before the

installation. If you are installing over the existing painted walls, take all loose paint off.

Please, note that some cutting and drilling might be necessary during the installation

process.

4. Make sure to turn off the water supply, remove faucet, handles or any fixture trims

protruding from the wall. Clean the surface removing soap film and dirt from all wall

surfaces using regular household detergent, and then wipe it dry.

Tools Required

Caulk

Tape

Measure Pencil

Screwdriver

Phillips

(Ø 5/16")

Drill bit

Level

Gun

Caulk

Drill

Electric

Hammer

Knife

T-Square

1 2 3 4 5 6 7 8 ... 33 34

No comments

DreamLine DL-6186-01 Installation Guide Page 3